Gauges: .008±, .012±, .015±
Surface: Electrochemically grained (special) and anodized
Sizes: Standard sheetfed sizes, special sizes available
Exposure: 21 Step Wedge - Solid step 4
UGRA Scale - Step 3
Resolution: 2-98% at 200 lines, 6-8 microlines
Processing: Aqueous, using Enco ND-232 Developer and RC 791 or Enco Subtractive Finisher Printing Sides: One
Run Rating: Long runs on sheetfed and Web presses (Run lengths are subject to press conditions.)
|
Type: Negative-working, subtractive, aqueous plate
Gauges: .005±, .008±, .012±, .015±, .020±
Surface: Electrochemically grained and anodized
Sizes: Standard sheetfed sizes, special sizes available
Exposure: 21 Step Wedge - Solid step 4-5
UGRA Scale - Solid 3-4
Resolution: 2-98% at 150 lines, 8-10 microlines
Processing: Aqueous subtractive - machine or hand process using Enco ND-143 Developer and RC-791, or Enco Subtractive Finisher
Printing Sides: One
Run Rating: Medium to long runs on sheetfed presses (Run lengths are subject to press conditions.)
|
 |
SET-R 0.13:
0.13 mm setting on the press - 0.100 mm polyester base
SET-R 0.20:
0.20 mm setting on the press - 0.175 mm polyester base
Sensitometric Properties:
red-sensitive (630-670 nm)
Originals:
digital files
Halftone reproduction:
tonal range from 5 to 95 % with 150 lpi screen ruling
Run length:
20,000 for film
Printing presses:
all sheet-fed offset presses; some web offset presses
Inks:
all normal offset inks (oil or rubber based)
|
|
|
